Learn how to HP printer in troubleshoot an a simple and straightforward manner. Make sure you have the correct ink or toner cartridges inserted, as well as enough ink or toner in the printer to complete your print job. On the printer control panel, make sure there are no problem warnings or blinking lights. Before you use the printer, make sure there are no mistakes. To clear any error conditions, restart the printer.
Restore Defaults:-
From the screen on your printer, navigate to Setup.
Tap Tools.
Tap Restore Defaults.
Tap Yes.
The printer will restart.
HP printer troubleshooting
When you encounter one of the following cases, your HP printer won’t print.
The printer driver is missing or outdated.
You get a faulty connection.
You set a bad configuration in Windows.
There’s something wrong with the printer.
Solution 1: Check the Status of Your HP Printer
When the HP printer not printing issue occurs, the first thing you need to do it to check the status of your printer. For example, when your printer is offline, you cannot print. Besides, you should also check other status of your HP printer.
To be specific, you should make sure that your printer has sufficient paper, ink or toner and without paper jam. If the printer cartridge’s status is faulty, you should replace it with a new one. After carrying out these operations, check if the HP printer can print properly. If not, try other methods immediately.
Solution 2: Execute Basic HP Printers Troubleshooting
You can also check some items with the printer to troubleshoot the HP printer not printing issue. Firstly, you should check the connection cables between the wall power to the HP printer power connector.
Then, perform a cabling check from the printer to Windows computer. You should also ensure that the network cable runs properly for the HP printer. In addition, have a look at the lights in front of the HP printer.
If they are not lighted, plug the power cord and turn on the printer. You can try restarting the HP printer by turning it off and unplug the power cord as well. After waiting for a few minutes, plug the cord back and turn it on to check if the printer works as usual.
Regards,
Peter